Product Description:
The 600 type water well drilling rig is a light, efficient and multifunctional crawler-type full hydraulic drilling rig. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
SL600S can drill holes in different strata (rock layer, mud layer, sand layer), and the maximum diameter can reach 4000mm.Unique bump design and centralized control operating system are easy to maintain and operate.This machine adopts excavator crawler chassis, which has high off-road performance and can also be installed on trucks, with stronger mobility.
Zhengyuan Serises crawler mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
Zhengyuan Serises deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer,and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.
Features:
- The drilling rig can use air DTH Hammer drilling and mud drilling.
- Centralized control console is suitable for each manipulation and control.Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
- The main drive system, the transfer case gearbox, double-winch unit, mud pump,turntable,drilling tower, feed system are setup on the chassis.
- It's a hydraulicrotary drilling rig with directional circulation. It can equipped with BW450 mud pump which adopts the slurry as the washing fluid and can drill on clay,sand and rock if it is equipped with suitabledrilling bit.
- The power of drilling rig comes from aYuchai engine,132kw engine drivesthe large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.
- The rotary head,have two gear,rotation speed is 90-180rpm stepless adjustment and the rotary torque is 12000/6000Nm.
- The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
- It can set up a generator which is convenient to welding or illuminate for work at night.
- Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
- The main drive of rig is hydrulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are also hydraulic operated.
- The tools winch winch is used for auxiliary lifting and casin.
- The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide dumping.
- Competitive in price, low cost of maintain.
Technical Parameters:
Technical parameters |
Unit |
SL600S
|
| Max drilling depth | M | 600 |
| Drilling diameter | mm | 105-400 |
| Air pressure | Mpa | 1.2-3.5 |
| Air consumption | m³/min | 16-55 |
| Drill pipe length | m | 6 |
| Drill pipe diameter | mm | 89/102 |
| Axial pressure | T | 6 |
| Lifting force | T | 35 |
| Fast lifting speed | m/min | 33 |
| Fast feeding speed | m/min | 55 |
| Max rotary torque | Nm | 12000/
6000 |
| Max rotary speed | r/min | 90/180 |
| Big auxiliary winch lifting force | T | - |
| Small auxiliary winch lifting force | T | 2.5 |
| Jacks stroke | m |
1.6 |
| Drilling efficiency | m/h |
10-35 |
| Moving speed | Km/h | 3 |
| Uphill angle |
| 21 ° |
| Weight of the rig | T | 12.5 |
| Dimension | m | 6.73*2.1*
2.63 |
| Engine | / | 132KW |
| Working condition | Unconsolidated formation and stone head |
| Drilling method | Top drive hydraulic rotary and pushing hammer or mud drilling |
| Matched DTH hammer | Medium and high air pressure series |
| Optional accessories | Mud pump,Centrifugal pump,Generator,foam pump |
FAQ:
Q: What is the brand name of this Truck Mounted Drilling Rig?
A: The brand name of this Truck Mounted Drilling Rig is Shandong Zhengyuan.
Q: What is the model number of this Truck Mounted Drilling Rig?
A: The model number of this Truck Mounted Drilling Rig is SC600S.
Q: Where is this Truck Mounted Drilling Rig manufactured?
A: This Truck Mounted Drilling Rig is manufactured in Shandong Province.
Q: Is this Truck Mounted Drilling Rig suitable for heavy-duty drilling operations?
A: Yes, the SC600S model from Shandong Zhengyuan is designed for heavy-duty drilling operations.
Q: Can this Truck Mounted Drilling Rig be customized to meet specific requirements?
A: Yes, Shandong Zhengyuan offers customization options to tailor the Truck Mounted Drilling Rig to specific requirements.
